Guides on WireGuard remote access, MSP tools, and NIS2 compliance.
Reach a Proxmox VE node's web UI, VM console, and shell from a browser through one WireGuard tunnel. No port forwarding, no static IP, no agent on the host.
Read more →Send a Wake-on-LAN magic packet to a remote client PC through a WireGuard tunnel. No port forwarding, no static IP, no relay box, no agent on the target.
Read more →Reach BMS and HVAC controllers, Niagara JACE web UIs, and BACnet/IP behind CGNAT from a browser. One WireGuard tunnel per building, no port forwarding.
Read more →How MSPs support SOC 2 Trust Services Criteria for remote access: WireGuard encryption, MFA, scoped access, kernel segregation, and audit logs.
Read more →Remotely manage EV charge points, their web UIs, OCPP, and Modbus across LTE sites from a browser. One WireGuard tunnel per site, no port forwarding.
Read more →Configure a ProxyLink WireGuard tunnel on a UniFi Dream Machine or UniFi gateway for browser RDP, SSH, and HTTP access to every LAN device. No static IP, no port forwarding.
Read more →Set up a ProxyLink WireGuard tunnel on a DrayTek Vigor for browser RDP, SSH, and HTTP access to every LAN device. No static IP, no port forwarding.
Read more →Remotely manage digital signage media players, displays, and CMS across LTE sites from a browser. One WireGuard tunnel per site, no port forwarding.
Read more →Reach solar inverters, data loggers, and Modbus TCP on unmanned PV sites from a browser. One WireGuard tunnel per site, no static IP, no port forwarding.
Read more →How MSPs meet ISO 27001 Annex A controls for remote access: WireGuard encryption, MFA, scoped access, network segregation, and full audit logs.
Read more →How MSPs meet GDPR obligations for remote access: EU-hosted WireGuard, full audit logs, MFA, and no session data routed through a third party.
Read more →Cloudflare Tunnel is great for publishing a web app, but weak for MSP device access. Here is the router-tunnel alternative with browser RDP and SSH.
Read more →How MSPs remotely access school MIS servers, whiteboards, CCTV, and switches from a browser. One WireGuard tunnel per site, no port forwarding.
Read more →Configure a ProxyLink WireGuard tunnel on OpenWRT via LuCI for browser RDP, SSH, and HTTP access to every LAN device. No static IP, no port forwarding.
Read more →ScreenConnect's agent-only model and the CVE-2024-1709 breach leave MSPs exposed. Here is the no-agent router-tunnel alternative for whole client sites.
Read more →Set up a ProxyLink WireGuard tunnel on Teltonika RUT routers for browser RDP, SSH, and HTTP access to every device on a 4G/LTE site behind CGNAT.
Read more →How MSPs remotely access POS back-office servers, NVRs, and switches across every store in a chain, one WireGuard tunnel per site, no port forwarding.
Read more →How MSPs and OT integrators remotely reach PLCs, HMIs, and SCADA on the factory floor, one WireGuard router tunnel, no agents on controllers, no open ports.
Read more →How MSPs remotely access clinic PMS servers, PACS, and imaging systems, one WireGuard router tunnel, no agents on medical equipment, GDPR-compliant.
Read more →How MSPs remotely access hotel PMS servers, PBX admin panels, NVR cameras, and switches from a browser, one WireGuard tunnel, no agents, no static IP.
Read more →BeyondTrust Remote Support (formerly Bomgar) works for enterprise Windows fleets. Here's where it fails MSPs managing NVRs, switches, and PBX systems, and what covers the gap.
Read more →How to set up a ProxyLink WireGuard tunnel on Asus routers (stock AX firmware or AsusWRT-Merlin), browser RDP, SSH, and HTTP access to every LAN device, no static IP, no port forwarding.
Read more →How to configure WireGuard on Ubiquiti EdgeRouter for ProxyLink, browser RDP, SSH, and HTTP access to every LAN device, no static IP, no port forwarding, no agent on targets.
Read more →How to set up a ProxyLink WireGuard tunnel on GL.iNet 4.x, browser RDP, SSH, and HTTP access to every LAN device, no static IP, no port forwarding.
Read more →Splashtop requires an agent on every device, which means NVRs, switches, and PBX systems are unreachable. Here's what MSPs use instead.
Read more →Port forwarding fails behind CGNAT, ISP blocks, and corporate firewalls. Here's how an outbound WireGuard tunnel gives full remote access without opening any ports.
Read more →Starlink uses CGNAT, port forwarding doesn't exist. Here's how an outbound WireGuard tunnel gives you full remote access to every device on a Starlink network.
Read more →How to set up WireGuard on OPNsense to get browser-based RDP and SSH to every device on your LAN (plus VNC to any device running a VNC server), no static IP, no port forwarding, no agent on targets.
Read more →The honest answer to the question every MSP should ask before committing to a remote access platform. What breaks, what doesn't, and what we're building next.
Read more →Tailscale is excellent for developer teams. For MSPs managing NVRs, PBX systems, and managed switches, here's where the agent-per-device model creates problems.
Read more →How to access Windows Remote Desktop through WireGuard, browser-based RDP to any Windows PC, no static IP, no port forwarding, no software on the target machine.
Read more →A practical guide for MSPs on setting up remote access to MikroTik-routed networks, browser RDP, VNC, and SSH to every device on the LAN, no agent required.
Read more →How MSPs can remotely access hotel NVR cameras and PBX admin panels with no static IP, no open ports, and no software installed on the devices.
Read more →A practical NIS2 compliance checklist for MSP remote access: MFA, EU hosting, audit logs, session recording, supply chain documentation, and incident response. What the directive actually requires, and which tools meet it.
Read more →How to set up WireGuard on pfSense to get browser-based RDP and SSH to every device on your LAN (plus VNC to any device running a VNC server), no static IP, no port forwarding.
Read more →TeamViewer and AnyDesk were both breached in 2024. If you manage multiple client sites, here is what to look for in a replacement, and how WireGuard-based access compares.
Read more →Access your Synology NAS remotely without QuickConnect, no port forwarding, no static IP, no third-party relay. A WireGuard tunnel on the router keeps your NAS dark to the internet.
Read more →AnyDesk was breached in 2024, attackers stole code signing keys and source code. Every agent on every client machine is one more attack surface to trust. We ranked 6 alternatives for MSPs by breach history, EU hosting, agent-free architecture, and NIS2 compliance. Updated June 2026.
Read more →Managed switches don't support remote access agents. Here's how to reach Cisco IOS, Ubiquiti UniFi, and any switch management interface from a browser, without installing anything on your laptop.
Read more →